Talker II by Digital Dowsing

Talker II by Digital Dowsing


$139.00

$139.00


This is another updated version of one of the popular products by Bill Chappell of Digital Dowsing.

The Talker II is an ITC communications tool

4 Phonetic speech modes:

  • Mode 1:  Phonetic Mode – Speech is formed by using phonemes, the basic blocks of human speech.
  • Mode 2:  Phonetic Mode w/White Noise – Speech is formed by using phonemes, the basic blocks of human speech, accompanied by White Noise.
  • Mode 3:  Reverse Phonetic Mode – Speech is formed by using phonemes, the basic blocks of human speech then played in reverse order.
  • Mode 4:  Reverse Phonetic Mode w/White Noise – Speech is formed by using phonemes, the basic blocks of human speech then played in reverse order, accompanied by White noise.

 

Changing The Gain Sensitivity:

The GAIN is the sensitivity of the device.  The higher the Gain, the MORE sensitive; the lower the Gain, the LESS sensitive the device will be. The levels of the Gain range from 1 to 10.  The factory default is set at 3.  To increase or decrease the sensitivity, follow the steps below:

 

  1. While unit is turned OFF, press and hold the MODE button.
  2. Keep holding the MODE button and turn the unit on.
  3. Once the Red indicator lights come on, release the MODE button. The unit will keep repeating the level at which the gain is set.
  4. Press the MODE button to increase to the next level.  The unit will announce the new level.
  5. Once you have reached the level of Gain you want, turn off the unit.
  6. When you reach Level 10, the unit will start over again at Level
  7. When you turn the unit back on, the Gain will be set to the new level.
  8. The Gain will stay at this level until you reset it.

 

Due to the popularity of Digital Dowsing products, this item may additional shipping time