|
 Electromagnetic Field Detectors
New Lower Prices many of our EMF meters!
Quick Links to Meters Winner of the Design and Innovations Award - CES 1999   The meter features both cell phone
frequency RF measurement as well as a single axis ELF
gaussmeter. The gaussmeter feature is calibrated around
50/60 Hz and also offers 2 scales: 0-5 and 0-50 mG. Remote probe with 2
foot extension cord allows user great flexibility and reach. Both RF
and
gaussmeter provide audio sound and large flashing light which
corresponds
to field strength so you can hear and see in the dark when you are
getting
a positive reading. It includes complete documentation on how to
conduct
proper measurements.
This
meter sells on most sites for $39.00 to $99.00 plus S&H. New Lower Price! Our price is $32.98 personal checks and money orders accepted ElectroSensor Electromagnetic Field Detector The Smallest EMF detector we've seen
Compact and easy-to-use,
ElectroSensor is the quickest way to measure EMF levels. Simply push a
button and the handheld unit's bright, simple-to-read LED
gauge lets you know within seconds whether there are electromagnetic
fields
in any area. A 10 LED light bar scale gives readings from 1.3 to 30 mG
in
small increments. A pickup coil in the tip of the unit can be rotated
in
both directions. This is great to keep in your pocket when your
hands
are filled up with other gadget:-) I carry this one around at every
investigation.
Requires 1 AAA battery (included). Only available in black.
New
Lower Price!
Our price is $24.99 personal checks and money orders accepted Electromagnetic Field Detector
This is a favorite of ours. It's
so easy to use. Unfortunately
it is a discontinued model, so get them while you still can! This
is an excellent meter to buy if it's your first one. Very easy to
read...
just look for a reading between 2 and 7 mG. Runs on 9v
batteries, not included.
Green light - "Safe" 0-2.5
milli Gauss These are not in the package but they are brand new. Any questions about relating emf readings to spirit activity? Not a problem, Email us with your question. Our price is $11.95 with on/off switch  You
do not
have to hold down the tab with this model. There is a
micro-switch
installed below the tab so you can click it on and click it again to
turn off. Other modified KII meters have the plastic
case cut into to install the switch and that can cause the case to be
less structurally sound.
New Lower Price! Our
price is $65.00
personal checks and money orders accepted  You
do not
have to hold down the tab with this model. There is a
micro-switch
installed below the tab so you can click it on and click it again to
turn off. Other modified KII meters have the plastic
case cut into to install the switch and that can cause the case to be
less structurally sound.
Our price is $75.00 personal checks and money orders accepted 
This
new meter is made by the same people who make the Cell
Sensor. Unlike the Cell Sensor, it is an EMF meter only and
does not have a separate probe. It's other features are:
Our
price is $29.99
personal checks and money orders accepted  This
EMF Hunter will detect EMF Low Frequency and High Frequency with
numerical bar display, visual and audible alarm. It also has
color coded LED light display of 1 milliguass to 10 milliguass to
indicate the exact level of EMFs.
The
meter does have limited capability to detect air temperature using a
plug in probe (probe available by special order only) but we've found
that this feature as it
is currently applied can't be practically applied for ghost hunting
(i.e is displays five temperature zones 102, 86, 66,50 32 degrees
Fahrenheit)
Our
price is $45.00
personal checks and money orders accepted TriField Natural EM meter  The TriField Natural EM Meter was
designed to do field measurements for special research. It detects
changes in extremely weak static (DC or "natural") electric and
magnetic fields, and signals with both a tone and the movement of
a needle-type gauge if either the electric or magnetic field changes
from previous levels. Its sensitivity is of interest to
researchers in the field of parapsychology. Every type of detectable
physical manifestation requires a certain amount of energy. For
example, "moving air" requires the expenditure of a small amount of
energy to get the air to move initially. A radio and
microwave detector is also included, which reads radio power directly.
Because man-made AC electric and magnetic fields are very common and
could interfere with readings of static fields, the meter has been
designed to ignore AC fields. Normal construction materials don't block
magnetic fields, so the meter can be placed indoors and will work
equally well, and due to the built-in tone, it can be used in the dark,
and will sound the tone at whatever level of field the user sets. It
operates on a standard 9-volt battery.
Our price is $174.00 personal checks and money orders accepted  The
original TriField ® Meter combines all the features needed for
fast, accurate measurements of electromagnetic fields. It independently
measures electric field and magnetic field, and is properly scaled to
indicate the full magnitude of currents produced by each type of field
inside a conductive body. As a result, it "sees" much more than any
other electromagnetic pollution
meter.
Depending on where the knob is set, the meter detects either frequency- weighted magnetic fields (two separate scales), or frequency-weighted electric fields in the ELF and VLF range. It has significant sensitivity at 100,000 Hz, well past the 17,000 Hz horizontal scan of video displays. The radio/microwave setting can detect up to three billion Hz (3 GHz), which lets you gauge radio- wave power, CB and cellular phone equipment, and many types of radars. This meter is the only one which combines magnetic, electric, and radio/microwave detectors in one package, so that the entire nonionizing electromagnetic spectrum is covered. In addition, the magnetic setting and the electric setting measure true magnitude, a feature found elsewhere only in more expensive meters. If you hold the meter in the center of a room and tip it to various angles, the magnetic reading will stay approximately the same regardless of which way you tip or rotate it. The electric reading is similar, although the presence of your body alters the actual electric field, so readings will vary more. The radio/microwave setting reads the full power of radiowaves when the meter is pointed toward the source. It operates on a standard 9-volt battery. Our price is $133.00 personal checks and money orders accepted
Gauss Master II EMF Meter   Hand-held,
lightweight and durable, with two easy to read scales (0-1 mG, &
0-10 mG), and dramatic audio signal. requires one 9V battery (not
included). Calibrated at 50-60 Hz.
Our price is $55.00 personal checks and money orders accepted
 Hand-held,
lightweight and durable. This
is the same meter used on the Ghost Hunters TV Show
•
Measurement Range: 0.1 mGauss to 199.9 mGauss • Single Axis • Reads in Tesla or Milligauss • Runs on one 9 volt battery (not included) • Frequency Bandwidth: 30 to 300 Hz (ELF frequency range) • Accuracy: ±4% at 50-60 Hz • Stand on backside to sit meter tilted up on a table top. Our price is $77.99 or Download
and print our order form to order via US Mail
personal checks and money orders accepted   We have personally tested this meter and it is a fantastic new tool. This Instrument was designed by Pro-measure for Paranormal enthusiasts. The Mel Meter Model 8704 was specifically designed for Paranormal Investigators. Many important features have been incorporated into this durable, precision hand held instrument. • ELF Range down to 30Hz ! • Glow in the dark buttons! • Custom Dual Display Correlates EMF & Temperature Cold Spots Simultaneously! • EMF "Burst" Mode Feature for Tracking Dynamic EMF movement • Measurement Ranges: 20, 200, 2000 uTesla 200, 2000, 20,000 mGauss • Super Bright Custom "Nightview" Display with On/Off Button • Fast Response Thermocouple Temperature Sensor • Record Feature Captures Min & Max Values • Tripod mountable Measures EMF & Temperature "Cold Spots" Simultaneously That's right...the Mel Meter is the only Instrument that can do this. If you're a Sci Fi Ghost Hunter fan, you'll notice that during their Investigations, they will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark. Custom "Night View" Display The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away. The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light. EMF "Burst Mode" This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values. So, if you have a EMF meter with a standard LCD display, get ready for a big change! Mel-Cal The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple!
Our
price is $95.00
or Download
and print our order form to order via US Mail
personal checks and money orders accepted  We have personally tested this meter and it is a fantastic new tool. This Instrument was designed by Pro-measure for Paranormal enthusiasts. The Mel ProNavigator was specifically designed for Paranormal Investigators. Many important features have been incorporated into this durable, precision hand held instrument. • ELF Range down to 30Hz ! This is 20Hz lower than the KII • Built in Night Vision Safe, High Intensity Red LED flashlight objects within a 30' Range. • Custom Dual Display Correlates EMF & Temperature Cold Spots Simultaneously! • Custom Glow-In-The-Dark Push Buttons. A 30 sec. Charge from Your Flashlight Lasts 3 Hours! • Custom Glow-In-The-Dark Lightning Bolt EMF Stickers Help Identify EMF "Hot Spots" for De-Bunking During Baseline Analysis. • EMF "Burst" Mode Feature for Tracking Dynamic EMF movement • Measurement Ranges: 20, 200, 2000 uTesla 200, 2000, 20,000 mGauss • Super Bright Custom "Night view" Display with On/Off Button • Fast Response Thermocouple Temperature Sensor • Record Feature Captures Min & Max Values • Tripod mountable Measures EMF & Temperature "Cold Spots" Simultaneously That's right...the Mel Meter is the only Instrument that can do this. If you're a Sci Fi Ghost Hunter fan, you'll notice that during their Investigations, they will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark. Custom "Night View" Display The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away. The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light. EMF "Burst Mode" This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values. So, if you have a EMF meter with a standard LCD display, get ready for a big change! Red Navigator Flashlight This feature utilizes a high intensity long life (100,000 hours) Collimated Red LED to provide instant illumination of the floor in front of you, and of objects up to 30' away. Ideal for fast paced tracking of EMF and Cold Spot changes in total darkness while using the backlight display, this 670nm wavelength will not interfere with Night Vision Equipment. Even after 5 hours of 100% continuous uninterrupted usage, The digital current regulation circuitry provides plenty of energy to power the Mel Meter and backlight Display for many more hours. Mel-Cal The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple!
or Download
and print our order form to order via US Mail
personal checks and money orders accepted   We have personally tested this meter and it is a fantastic new tool. This Instrument was designed by Pro-measure for Paranormal enthusiasts. The Mel Meter Model 8704 was specifically designed for Paranormal Investigators. Many important features have been incorporated into this durable, precision hand held instrument. • ELF Range down to 30Hz ! • Glow in the dark buttons! • Custom Dual Display Correlates EMF & Temperature Cold Spots Simultaneously! • EMF "Burst" Mode Feature for Tracking Dynamic EMF movement • Measurement Ranges: 20, 200, 2000 uTesla 200, 2000, 20,000 mGauss • Built in Night Vision Safe, Red backlit display • Fast Response Thermocouple Temperature Sensor • Record Feature Captures Min & Max Values • Tripod mountable Measures EMF & Temperature "Cold Spots" Simultaneously That's right...the Mel Meter is the only Instrument that can do this. If you're a Sci Fi Ghost Hunter fan, you'll notice that during their Investigations, they will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark. Custom Red "Night Vision Compatible" Display The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away. The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light. EMF "Burst Mode" This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values. So, if you have a EMF meter with a standard LCD display, get ready for a big change! Mel-Cal The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple!
Our price is $95.00 or Download
and print our order form to order via US Mail
personal checks and money orders accepted Mel-8704R ProNavigator
EMF Meter-Thermometer-Red LED Flashlight- Nightvision Compatible red backlight screen  We have personally tested this meter and it is a fantastic new tool. This Instrument was designed by Pro-measure for Paranormal enthusiasts. The Mel ProNavigator was specifically designed for Paranormal Investigators. Many important features have been incorporated into this durable, precision hand held instrument. • ELF Range down to 30Hz ! This is 20Hz lower than the KII • Built in Night Vision Safe, Red backlit display • Built in Night Vision Safe, High Intensity Red LED flashlight objects within a 30' Range. • Custom Dual Display Correlates EMF & Temperature Cold Spots Simultaneously! • Custom Glow-In-The-Dark Push Buttons. A 30 sec. Charge from Your Flashlight Lasts 3 Hours! • Custom Glow-In-The-Dark Lightning Bolt EMF Stickers Help Identify EMF "Hot Spots" for De-Bunking During Baseline Analysis. • EMF "Burst" Mode Feature for Tracking Dynamic EMF movement • Measurement Ranges: 20, 200, 2000 uTesla 200, 2000, 20,000 mGauss • Super Bright Custom "Night view" Display with On/Off Button • Fast Response Thermocouple Temperature Sensor • Record Feature Captures Min & Max Values • Tripod mountable Measures EMF & Temperature "Cold Spots" Simultaneously That's right...the Mel Meter is the only Instrument that can do this. If you're a Sci Fi Ghost Hunter fan, you'll notice that during their Investigations, they will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark. Custom Red "Night Vision Compatible" Display The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away. The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light. EMF "Burst Mode" This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values. So, if you have a EMF meter with a standard LCD display, get ready for a big change! Red Navigator Flashlight This feature utilizes a high intensity long life (100,000 hours) Collimated Red LED to provide instant illumination of the floor in front of you, and of objects up to 30' away. Ideal for fast paced tracking of EMF and Cold Spot changes in total darkness while using the backlight display, this 670nm wavelength will not interfere with Night Vision Equipment. Even after 5 hours of 100% continuous uninterrupted usage, The digital current regulation circuitry provides plenty of energy to power the Mel Meter and backlight Display for many more hours. Mel-Cal The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple!
or Download
and print our order form to order via US Mail
personal checks and money orders accepted Mel-8704R-Vibe ProNavigator is Designed Exclusively For Paranormal Investigators Now with High Sensitivity Vibration and Touch Detection • ELF Range down to 30Hz ! • Night Vision Safe, High Intensity Red Flashlight & Red Backlight • High Sensitivity (1Hz-10Hz)Vibration / Touch Detection- 2 sec. Beep with Auto Reset • Custom Dual Display Correlates EMF & Temperature Cold Spots Simultaneously! • Custom Glow-In-The-Dark Push Buttons. A 30 sec. Charge from Your Flashlight Lasts 3 Hours! • Custom Glow-In-The-Dark Lightning Bolt EMF Stickers Help Identify EMF "Hot Spots" for De-Bunking During Baseline Analysis. • EMF "Burst" Mode Feature is Ideal for Sweeping a room & Tracking Dynamic EMF movement • Measurement Ranges: 20, 200, 2000 uTesla 200, 2000, 20,000 mGauss • Super Bright Custom Red "Night view" Display with On/Off Button • Fast Response Type "K" Thermocouple Temperature Sensor • Record Feature Captures Min & Max Values Mel-Vibe This feature utilizes a high sensitivity Accelerometer to detect just the slightest Touch or Vibration. Another useful tool to engage spirit when gathering evidence. We had a lot of fun testing this new feature out. Imagine something so sensitive that it detects a cotton ball, paper clip, piece of popcorn or a slight tap of your finger anywhere on a 8 long wood table top! Or, being able to detect a foot "stomp" on a 4" slab of concrete from 30' away! It can even detect the sound pressure level / frequency from your voice if you shout toward it from 4' away. many people have felt the sensation of a touch on their arm, shoulder, back and so on. If Spirit is willing to cooperate, just the slightest "Touch" anywhere on the Mel meter will be detected and acknowledged with a short 2 sec "beep" and then reset. Measures EMF & Temperature "Cold Spots" Simultaneously That's right...the Mel Meter is the only Instrument that can do this. If you're a Sci Fi Ghost Hunter fan, you'll notice that during their Investigations, they will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark. Custom Red "Night Vision Compatible" Display The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away. The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light. EMF "Burst Mode" This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values. So, if you have a EMF meter with a standard LCD display, get ready for a big change! Red Navigator Flashlight This feature utilizes a high intensity long life (100,000 hours) Collimated Red LED to provide instant illumination of the floor in front of you, and of objects up to 30' away. Ideal for fast paced tracking of EMF and Cold Spot changes in total darkness while using the backlight display, this 670nm wavelength will not interfere with Night Vision Equipment. Even after 5 hours of 100% continuous uninterrupted usage, The digital current regulation circuitry provides plenty of energy to power the Mel Meter and backlight Display for many more hours. Mel-Cal The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple!
or Download
and print our order form to order via US Mail
personal checks and money orders accepted Mel-KII Hybrid Digital EMF, Temperature, Red Flashlight, Red Backlight & Integrated KII in One!   • All in One Paranormal Instrument
EMF - Ambient Temp. - Red Flashlight - Red Backlight Display • Detects EMF (Mel & KII) & Cold Spots Simultaneously • Selectable units of °F/°C • EMF "Burst" Mode Feature for Rapid EMF Detection • Super Bright "Red Nightview" Backlight Display with On/Off Button • Glow in The Dark Push Buttons • Fast Response Thermocouple Temperature Sensor • Record Feature Captures Min & Max Values • KII with Push On/ Push Off Switch & Sound. • Easy to read Multi-Segment Mini T1 All Red LED Display • Five level milliGauss ranges • 50 & 60 Hz operation • Single Axis • Accuracy of ±5% at 50-60Hz • Instantaneous Response To EMF Fluctuations & Spikes • 9Vdc Operation Note: The KII device will be influenced by cell phones, text message devices, RF transmitters & walkie talkie devices at certain frequencies. Measures
EMF & Temperature "Cold Spots" Simultaneously
That's right...the Mel Meter is the only Instrument that can do this. If you're a Sci Fi Ghost Hunter fan, you'll notice that during their Investigations, they will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark. Custom Red "Night Vision Compatible" Display The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away. The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light. EMF "Burst Mode" This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values. So, if you have a EMF meter with a standard LCD display, get ready for a big change! Red Navigator Flashlight This feature utilizes a high intensity long life (100,000 hours) Collimated Red LED to provide instant illumination of the floor in front of you, and of objects up to 30' away. Ideal for fast paced tracking of EMF and Cold Spot changes in total darkness while using the backlight display, this 670nm wavelength will not interfere with Night Vision Equipment. Even after 5 hours of 100% continuous uninterrupted usage, The digital current regulation circuitry provides plenty of energy to power the Mel Meter and backlight Display for many more hours. Mel-Cal The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple!
Our price is $179.90 |
